 HYDRAULIC
ACTUATED POWER TAKE-OFF HFO TRANSFLUID
The HFO clutches have been developed by Transfluid
to meet the growing market demand for power take offs for high speed, high
horsepower industrial engines and having remote control operation.
HFO
consist of an oil actuated clutch assembly (dry plates) with shaft and bearings
suitable for high radial loads mounted in a cast iron housing that provides for
easy engine installation.
The connecting flange and housing to the engine are SAE standard.
The oil actuation is provided by a rotating union mounted on the shaft end
allowing the oil to engage and disengage the clutch.
This system allows
the use of HFO for belt driven applications only. The oil actuation allows
remote control as well as a larger transmittable torque compared to the
traditional overcenter PTOs. In addition, due to the continuous pressure
applied to the clutch plates, the HFO is a self adjusting clutch which
drastically reduces the maintenance costs especially on heavy duty applications
where plate wear is typical.
Additional to the HFO is the HFF design
(flanged shaft). This model was designed for road milling machines where a
compact layout is required. The performances of HFO and HFF are identical. For
more information apply Transfluid.
|
Back to
Transfluid fluid couplings |
John Deere
| Felsted |
Reman |
Yanmar® |
Transfluid |
Funk
Katolight | Accessories |
About Us |
Contact Us | Home | Site Map
|
|











 Northstar Power
Co. 2402 SE Hulsizer Road Ankeny, IA
50021 Phone: 515-964-6100 Fax:
515-964-6119
|